All Categories
    Menu Close

    3M 5421 UHMW Polyethylene Tape

    Manufacturer: 3M
    3M UHMW Polyethylene Tapes are film coated with a rubber adhesive which provides an excellent abrasion resistant surface. These tapes feature a unique combination of properties that make it ideal for many tough impact wear or sliding applications. 3M UHMW-PE Film Tape 5421 is a thinner version of 3M UHMWPE Film Tape 5423.
    SKU: ม้วน/Roll
    ฿1,099.00 excl tax
    This product has a minimum quantity of 9
    i h
    Ship to
    Shipping Method
    Estimated Delivery
    No shipping options


    • Tape demonstrated no evidence of wear through after Taber Abrasion at 1000 cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet.
    • Low water vapor transmission rate <0.50 g/100in.2/24hrs.
    • Thick caliper UHMW polyethylene tape for extended service life as a protective surface against tough impact wear or sliding applications.
    • Outstanding abrasion resistance so will outwear PTFE and other materials in sliding applications.
    • Low coefficient of friction characteristics is exceeded only by PTFE. 
    • UHMW-PE tape can be used where lubrication is not possible because of contamination.
    • Rubber Adhesive provides good initial tack for immediate bonding to material surface.
    • Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.
    Typical Physical Properties 
    3M tape 5421 
    Adhesion to Steel: 34 oz./in. width (37 N/100 mm) 
    Tensile Strength: 46 lbs/in. width (796 N/100 mm) 
    Elongation at Break: 470% 
    Backing Thickness: 5.0 mils (0.13 mm) 
    Total Tape Thickness 6.7 mils (0.17 mm) 
    Liner Thickness: 3.5 mils (0.09 mm) 
    Temperature Use Range: -30° to 225°F (-34° to 107°C) 
    0.0 0
    Write your own review Close
    • Only registered users can write reviews
    • Bad
    • Excellent