||Smooth crepe paper with a solvent resistant saturant
||6.3 mils (0.16 mm)
|Standard Roll Length
||55 m (60.17 yds.)*
|Adhesion to Steel
||37 oz./in. width (41 N/100 mm)
||27 lbs./in. width (472 N/100 mm)
|Elongation at Break
|Temperature Use Range
||Up to 250°F (121°C) for 30 minutes
- Has been laboratory tested on painted panels and found to remove cleanly at bake
temperatures of up to 250°F (121°C) for 30 minutes. The actual temperature and
time performance may be higher or lower for a given application. Clean removal
can vary dependent on surface type, processing conditions (such as multiple
bakes), type of paint involved as well as the temperature of the surface at removal.
We recommend testing the product under your conditions to determine if it meets
- Excellent transfer resistance to “difficult to remove from” surfaces like EDPM
- Tests indicate it is better than conventional masking tapes for sunlight resistance,
it is still advised that it not be subjected to outdoor exposure or prolonged periods
of sunlight as tape may become difficult to remove.
- Can be qualified for PPP-T-42C, Type I, (CID-A-A-883A).
- Excellent paint masking tape.
- Used throughout industry for holding, protecting, bundling and a vast number of
other difficult jobs where a pressure sensitive tape is needed.
||Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.
||To obtain best performance, use this product within one year from date of
||The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
||Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
|Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
|Limitation of Liability
||Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.