Personal menu

3M VHB GPH-110GF Acylic foam tape อะคริลิคโฟมเทป

Manufacturer: 3M

3M VHB GPH-110GF เป็นเทปกาวอะคริลิค หนา 0.045 นิ้ว (1.1 มม.) พร้อมแกนโฟมสีเทา สามารถใช้ยึดติดชิ้นงานที่ต้องพ่นสีฝุ่นและผ่านการอบที่อุณหภูมิสูงได้ สูงถึง 230 ˚C (ระยะเวลาสั้นๆ) ให้การยึดติดที่สวยงาม ไม่ต้องเจาะรู ไม่เห็นรอยการเชื่อม หรือหัวน๊อต สกรู ใช้ได้ทั้งงานภายนอกและภายใน กันน้ำ ทนสภาวะอากาศ

SKU: ม้วน/Roll

ขนาด / Size *

THB1,130.00 excl tax

Qty:

i h

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Product Files

3M GPH-110GF TDS

Overview
ข้อมูลทางเทคนิค
Reviews
Contact Us

3M VHB GPH-110GF เป็นเทปโฟมอะคริลิกสองหน้าสีเทาหนา 0.045 นิ้ว (1.1 มม.) พร้อมซับฟิล์มโพลีเอทิลีนสีแดง โฟมที่เข้ากันได้จะให้การสัมผัสที่ดีระหว่างวัสดุพิมพ์แม้ว่าจะไม่ตรงกันเล็กน้อยก็ตาม GPH-110GF เป็นส่วนหนึ่งของซีรี่ส์ 3M VHB Tape GPH ซึ่งยึดติดกับพื้นผิวที่หลากหลายรวมทั้งโลหะ พลาสติกและวัสดุที่ทาสี เทปตระกูลนี้มีประสิทธิภาพอุณหภูมิสูงที่เหนือกว่าทำให้เหมาะสำหรับใช้ยึดติดชิ้นงานที่ต้องพ่นสีฝุ่นและผ่านการอบที่อุณหภูมิสูงได้ สูงถึง 230 ˚C (ระยะเวลาสั้นๆ) ให้การยึดติดที่สวยงาม ไม่ต้องเจาะรู ไม่เห็นรอยการเชื่อม หรือหัวน๊อต สกรู ใช้ได้ทั้งงานภายนอกและภายใน กันน้ำ ทนสภาวะอากาศ

เนื้อเทป : อะคริลิคโฟม
กาว : อะคริลิค
ไลน์เนอร์ : ฟิล์ม PE สีแดงพิมพ์ 3M
แรงยึดติด (peel) : 37 N/cm
ความหนาของเทป : 1.1 มม.
อุณหภูมิ : อุณหภูมิในการทำงานสูงสุด 230 ˚C (ระยะเวลาสั้นๆ)

ลักษณะการใช้งาน

ใช้ติดถาวร ติดได้รวดเร็วและใช้งานง่าย มีแรงยึดติดเบื้องต้นสูง (high initial track)
ให้การยึดติดที่สวยงาม ไม่ต้องเจาะรู ไม่เห็นรอยการเชื่อม หรือหัวน๊อต สกรู
สามารถใช้แทนน็อต สกรูได้
ทนอุณหภูมิสูงถึง 230 ˚C (ระยะเวลาสั้นๆ) สามารถใช้ยึดติดชิ้นงานที่ต้องพ่นสีฝุ่นและผ่านการอบที่อุณหภูมิสูงได้
ใช้ได้ทั้งงานภายนอกและภายใน กันน้ำ ทนสภาวะอากาศ
การใช้งาน การติดปะเก็น, การติดตั้งวัสดุ หรืองานแต่งขอบ, แผงผนังกับโครง/แผ่นเสริมแรงกับแผ่นผนัง

3Mเทปกาวสองหน้า

เป็นเทปกาวที่มีกาวสองด้านแแบบบาง เพื่อใช้สำหรับงานปะ ติด ต่อ ชิ้นงานหรือวัสดุสองด้านเข้าด้วยกัน สามารถใช้ได้กับพื้นผิวที่ติดได้ง่าย หรือ พื้นผิว ที่ติดยาก ยึดติดพื้นผิวได้หลากหลายประเภท เช่น กระจก พลาสติก ยางไม้ กระดาษ เหล็ก คอนกรีต โฟม พอลิคาร์บอเนต และอื่นๆ

เทปกาวสองหน้าแรงยึดติดสูง VHB (3M VHB Tape)

เทปกาวสองหน้า เนื้อกาวอะคริลิคให้แแรงยึดสูง สามารถใช้แทนน็อต สกรู เหมาะสำหรับงานที่ต้องการความแข็งแรงสูง และการรับน้ำหนัก ยึดติดได้ถาวร ให้ความเรียบสม่ำเสมอ ใช้ได้ทั้งงาน ภายในและภายนอก ทนต่อสภาวะแวดล้อม แสงแดด ความชื้นได้เป็นอย่างดี

Typical Physical Properties

Property	Values		Method	Notes
Color	Gray
Total Tape Thickness	1.1 mm	0.045 in	ASTM D3652
Thickness Tolerance	±10 %
Adhesive	Acrylic
Adhesive Carrier	Conformable Acrylic Foam (closed cell)
Density	710 kg/m³	45 lb/ft³	ASTM D3574	Foam with adhesive
Liner	Red PE film with 3M™ VHB™ print

Typical Performance Characteristics

Property	Values		Method	Dwell/Cure Time	Dwell Time Units	Temp C	Temp F	Environmental Condition	Substrate	Backing	Notes	Test Condition
90° Peel Adhesion	21 lb/in		ASTM D3330	72	hr	22C	72F	52%RH	Stainless Steel	2 mil Aluminum Foil	12 in/min (300 mm/min)
Normal Tensile	670 kPa	95 lb/in²	ASTM D897	72 hr @ Room Temperature					Aluminum		1 in² (6.45 cm²), Jaw Speed 2 in/min (50.8 mm/min). Peak force to separate is measured.	Room Temperature
Overlap Shear Strength	730 kPa	105 lb/in²	ASTM D1002	72 hr @ Room Temperature					Stainless Steel		1 in² (6.45 cm²), Jaw speed 0.5 in/min (12.7 mm/min). Peak force to separate is measured.	Room Temperature
Short Term Temperature Resistance	230 °C	450 °F									No change in room temperature dynamic shear properties following 4 hours conditioning at indicated temperature with 100 g/static load. (Represents minutes, hours in a process type temperature exposure).
Long Term Temperature Tolerance	150 °C	300 °F									Maximum temperature where tape supports at least 250 g load per 0.5 in² in static shear for 10,000 minutes. (Represents continuous exposure for days or weeks).
Static Shear	1000 g		ASTM D3654						Stainless Steel		Tested at various temperatures and gram loadings. 0.5 in² (3.23 cm²). Will hold listed weight for 10,000 minutes (approximately 7 days).	Room Temperature
Static Shear	500 g		ASTM D3654						Stainless Steel		Tested at various temperatures and gram loadings. 0.5 in² (3.23 cm²). Will hold listed weight for 10,000 minutes (approximately 7 days).	177°C (350°F)
90° Peel Adhesion	37 N/cm		ASTM D3330	72	hr	22C	72F	52%RH	Stainless Steel	2 mil PET	12 in/min (300 mm/min)

Available Sizes

Property	Values		Attribute Modifier
Standard Roll Length	32.9 m	36 yd
Minimum Available Width	6.4 mm	0.25 in
Maximum Available Width	1118 mm	44 in
Normal Slitting Tolerance	± 0.8 mm	± 1/32 in
Core Size	76.2 mm	3.0 in	ID

ข้อควรพิจารณาพิเศษ
1. อย่าใช้ไพรเมอร์กับเทป 3M GPH เทป GPH ทำงานได้ดีที่สุดที่อุณหภูมิสูงเมื่อยึดติดกับวัสดุโดยตรง
2. 3M GPH Tapes เข้ากันได้กับสารเคมีที่มักใช้ในกระบวนการก่อนการเคลือบสี (พ่นและจุ่ม) โดยต้องทดสอบกับซัพพลายเออร์ของสารเคมีก่อน

UL746C Listings

Design Considerations

Adhesion to the substrate is important in achieving bonding success. Adhesives must flow onto the substrate surfaces in order to achieve intimate contact area and allow the molecular force of attraction to develop. The degree of flow of the adhesive on the substrate is largely determined by the surface energy of the substrate. 3M™ VHB™ Tape GPH series products bond well to high (HSE) and medium (MSE) surface energy materials. The image below shows typical materials in these categories.
Achieving good contact is also important. The necessary thickness of tape depends on the rigidity of substrates and their flatness irregularity. While the 3M™ VHB™ Tapes will conform to a certain amount of irregularity, they will not flow to fill gaps between the materials. For bonding rigid materials with normal flatness, consider use of tapes with thickness of 45 mils (1.1 mm) or greater. As the substrate flexibility increases thinner tapes can be considered.
Using the right amount of tape is important to handle the expected stresses. Because 3M™ VHB™ Tapes are viscoelastic by nature their strength and stiffness is a function of the rate at which they are stressed. They behave stronger with relatively faster rate of stress load (dynamic stresses) and will tend to show creep behavior with stress load acting over a long period of time (static stresses). As a general rule, for static loads, approximately four square inches of tape should be used for each pound (57 cm² of tape per kg) of weight to be supported in order to prevent excessive creep. For dynamic loads a useful design factor is 12 lb/in2 (85 kPa) for most dynamic stresses in general applications.
Allow for thermal expansion/contraction. 3M™ VHB™ Tapes can perform well in applications where two bonded surfaces may expand and contract differentially. Assuming good adhesion to the substrates, the tapes can typically tolerate differential movement in the shear plane up to 3 times their thickness.
Bond Flexibility: While an advantage for many applications where allowing differential movement is a benefit, the tape bonds are typically more flexible than alternative bonding methods. Suitable design modifications or periodic use of rigid fasteners or adhesives may be needed if additional stiffness is required.
Performance in Severe Cold Temperature can be challenging. Applications which require performance at severe cold temperatures must be thoroughly evaluated by the user if the intended use will subject the tape product to high impact stresses. A technical bulletin “3M™ VHB™ Tape Cold Temperature Performance” (70-0707-3991-0) is available for additional information.

Handling/Application Information

Application Techniques

Clean: Most substrates are best prepared by cleaning with a 50:50 mixture of isopropyl alcohol (IPA*) and water prior to applying 3M™ VHB™ Tapes.
Exceptions to the general procedure that may require additional surface preparation include:
• Heavy Oils: A degreaser or solvent-based cleaner may be required to remove heavy oil or grease from a surface and should be followed by cleaning with IPA/water.
• Abrasion: Abrading a surface, followed by cleaning with IPA/water, can remove heavy dirt or oxidation and can increase surface area to improve adhesion.
• Adhesion Promoters: Priming a surface can significantly improve initial and ultimate adhesion to many materials such as plastics and paints.
• Porous surfaces: Most porous and fibered materials such as wood, particleboard, concrete, etc. need to be sealed to provide a unified surface.
• Unique Materials: Special surface preparation may be needed for glass and glass-like materials, copper and copper containing metals, and plastics or rubber that contain components that migrate (e.g. plasticizers).
Refer to 3M Technical Bulletin “Surface Preparation for 3M™ VHB™ Tape Applications” for additional details and suggestions. (70-0704-8701-5)
*Note: These cleaner solutions contain greater than 250 g/l of volatile organic compounds (VOC). Please consult your local Air Quality Regulations to be sure the cleaner is compliant. When using solvents, be sure to follow the manufacturer’s precautions and directions for use when handling such materials.
Pressure: Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact and helps improve bond strength. Typically, good surface contact can be attained by applying enough pressure to insure that the tape experiences approximately 15 psi (100 kPa) pressure. Either roller or platen pressure can be used. Note that rigid surfaces may require 2 or 3 times that much pressure to make the tape experience 15 psi.
Temperature: Ideal application temperature range is 70°F to 100°F (21°C to 38°C). Pressure sensitive adhesives use viscous flow to achieve substrate contact area. Minimum suggested application temperature for the 3M™ VHB™ Tape GPH family is 50°F (10°C). Minimum application temperature does vary by 3M™ VHB™ tape family and ranges from 32°F to 60°F (0°C to 15°C)
Note: Initial tape application to surfaces at temperatures below these suggested minimums is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. To obtain good performance with all 3M™ VHB™ Tapes, it is important to ensure that the surfaces are dry and free of condensed moisture.
Time: After application, the bond strength will increase as the adhesive flows onto the surface (also referred to as “wet out”). At room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. This flow is faster at higher temperatures and slower at lower temperatures. Ultimate bond strength can be achieved more quickly (and in some cases bond strength can be increased) by exposure of the bond to elevated temperatures (e.g. 150°F [66°C] for 1 hour). This can provide better adhesive wetout onto the substrates. Abrasion of the surfaces or the use of primers/ adhesion promoters can also have the effect of increasing bond strength and achieving ultimate bond strength more quickly.

Storage and Shelf Life

All 3M™ VHB™ Tapes have a shelf life of 24 months from date of manufacture when stored at 40°F to 100°F (4°C to 38°C) and 0-95% relative humidity. The optimum storage conditions are 72°F (22°C) and 50% relative humidity.
Performance of tapes is not projected to change even after shelf life expires; however, 3M does suggest that 3M™ VHB™ Tapes are used prior to the shelf life date whenever possible.
The manufacturing date is available on all 3M™ VHB™ Tapes as the lot number, typically marked on the core or on a label on the outer roll lap. The lot number, typically a 4 digit code, is a Julian date (Y D D D). The first digit refers to the year of manufacture, the last 3 digits refer to the days after January 1. Example: A lot number of 7266 (or 17266) would translate to a date of manufacture of Sept. 23 (266th day of year) in 2017.

Industry Specifications

EN 45545 test report details (ISO 5659-2, ISO 9239-1, ISO 5660-1, ISO 5658-2), UL 746C (File MH17478)

Trademarks

3M and VHB are trademarks of 3M.

Family Group

	GPH-060GF	GPH-110GF	GPH-160GF
Color	Gray	Gray	Gray
Total Tape Thickness (mm)	0.6	1.1	1.6
Adhesive	Acrylic	Acrylic	Acrylic
Adhesive Carrier	Conformable Acrylic Foam (closed cell)	Conformable Acrylic Foam (closed cell)	Conformable Acrylic Foam (closed cell)
Liner	Red PE film with 3M™ VHB™ print	Red PE film with 3M™ VHB™ print	Red PE film with 3M™ VHB™ print

ISO Statement

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

Technical Information

The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

Product Selection and Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer

3M warrants for 24 months from the date of manufacture that 3M™ VHB™ Tape will be free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. This warranty does not cover damage resulting from the use or inability to use 3M™ VHB™ Tape due to misuse, workmanship in application, or application or storage not in accordance with 3M recommended procedures (except to the extent 3M approves and issues a specific application warranty, for which the customer must apply, receive 3M approval, and meet all applicable warranty and process requirements, the additional details, terms, and conditions of which are available from 3M). If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability

Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

0 review(s)

Write your own review Close

Only registered users can write reviews

Your name *

Your email *

Enquiry *

Product tags

3M VHB GPH-110GF Acylic foam tape อะคริลิคโฟมเทป

Typical Performance Characteristics

Available Sizes

UL746C Listings

Design Considerations

Handling/Application Information

Storage and Shelf Life

Industry Specifications

Trademarks

Family Group

ISO Statement

Technical Information

Product Selection and Use

Warranty, Limited Remedy, and Disclaimer

Limitation of Liability

3M

NITTO DENKO

SOKEN

ONE STEP

NICHIBAN

TESA

SEKISUI

DIC

WETAPE

KINGHAWK

HANNAM

TOWA

PLASGRAD

DEXERIALS

DONG WOO ST

ICHINEN CHEMICALS

LORD

UNITAPE

SHIN-ETSU

DUPONT

YAESU

SAINT GOBAIN

Lohmann